Look on discourse for my thread on 6718s. All explained thereCan someone give me a shopping list to make my guidance ready 7626 massey Ferguson steer itself please? A dummies guide to install it would be great! TIA
Look on discourse for my thread on 6718s. All explained thereCan someone give me a shopping list to make my guidance ready 7626 massey Ferguson steer itself please? A dummies guide to install it would be great! TIA
That would be the reference offset, explained near the end of video, it shows how it can be saved and altered, did that not work?. I still need to sort subtitles and chapters, but it was hours last night alone on that one (I think all in, that took around 7hrs) and I ain't going near PC tonightThank you for taking the time to make these they are very helpfull
Would it be possible to get advice to alter the boundary if it needs correcting from a wrong position?
Some of mine are a meter or so off(messing with base station )
I've tried the offset fix but that doesn't seem to do anything
Ahh no we at crossed wire thereThat would be the reference offset, explained near the end of video, it shows how it can be saved and altered, did that not work?. I still need to sort subtitles and chapters, but it was hours last night alone on that one (I think all in, that took around 7hrs) and I ain't going near PC tonight
Ah sorry yeah I see what you mean. No way as far as I knowAhh no we at crossed wire there
Some of My boundaries are wrong due to messing with the base
I normally just delete and start again,was wondering if there was a way to nudge boundary line not the reference line
Don't worry bout it
So these cog sets aren't universal then . Would like a set for a valtra if this fits send it over if I need something else could you point me in the right direction. Thanks. M.If anyone in the UK has a Claas Ares, Arion or Axion years 2005-2012 this a custom 3D printed cog set moulded to the steering wheel. Small cogs fits a 12mm Phidgets motor shaft.
View attachment 1172737
Posted free to to who'd like it, just promise to pop a pound or two in charity collection box of your choice.
There is the potato farmer universal cogs, but this one is moulded to fit a Claas steering wheel specifically.So these cog sets aren't universal then . Would like a set for a valtra if this fits send it over if I need something else could you point me in the right direction. Thanks. M.
Put a picture of what you have got.I got some parts to build.
I am interested in what exactly needs to be programmed and how since I am not very good with computers.
@andyinv has a few good videos on the tube about itI got some parts to build.
I am interested in what exactly needs to be programmed and how since I am not very good with computers.
Have you seen the video on YouTube about steer settings. Think its called something like 'basic steer settings 'Hi everyone, just wondering if someone could send me some photos of there steers setting so I can give them a try as I’m still trying to fine tune them!
Thank you
Yes, I found that the other day. I was just hoping to try rob someone else’s. Before I start going to town on fine tuning it myself.Have you seen the video on YouTube about steer settings. Think its called something like 'basic steer settings '
Found it
It's too hard to compare,as if someone has different setupsYes, I found that the other day. I was just hoping to try rob someone else’s. Before I start going to town on fine tuning it myself.
Could you not get a Cytron MD13S?is there a version for him to be outside in a special box and for him to get a signal somehow