GPS_Support_2014
Member
Sadly the update doesn’t seem to have solved it, hopefully make some calls tomorrow to get help on it.
I don’t know if this settings page is correct, I’ve tried it on 6 and 12 soft keys, there’s versions 2,3&4 available, I’ve tried all 3. I’ve found an icon that says VT upload, with a (I’m guessing) loading bar under it, that’s not doing anything.
View attachment 857556
Most implements that I’ve worked with support version 3 so try leave it on that setting.
Do you have a photo of the implement vt screen loaded on the Valtra screen just to see if it’s one I recognise?
If you go to Diagnostics > VT > NVM you should see the object pools loaded from all implements that were connected to the display. You should see one for your amazon. Is there one there for RDS? If you read the small text it should be obvious for which implement it’s from.
If there is one from RDS try deleting it, switching off display, reconnecting implement and then switch on the display to see if it loads again.
Use this instruction as a guide:
https://www.agtron.com/_uploads/documents/DeletingPoolsFromCaseIHPro700_2016-10-20.pdf