Neighbour damaging fencing

[BredRedHfd]

.
















PS - I'm winding you up.

I thought that, so I've done it instead

 

[Skintagain]

Chuck a telegraph pole or similar down on the ground next to the fence.

Bumper or back wheel will touch it before they get as close to the fence.

Big electric pole I was thinking

 

[Flatlander]

I’m not known for being tactful with others outside the farming community but given its a small tight knit community I’d be in favour or attaching the fence to the tow hitch and rip your fence out. Granted it’s malicious but it should put the boss on a different footing regards your request on the parking. Nothings going to change until it’s costing them money. Might want to check fir security cameras thou.

 

[Kidds]

Big electric pole I was thinking

I had a problem with others parking in my way, 3 concrete railway sleepers sorted it instantly.

 

[Jam Tomorrow]

Put the concrete sleepers in front of the vans on a Sunday evening.
He’ll catch on a bit quicker .

 

[Oliveau]

Be there when the vans are parking up & have a quiet word witht the drivers, explaining the error of their ways.

 

[Mc115reed]

Get your planning permission sorted,, then ask them again and if they don’t sort it tip a few loads of muck up against the fence ideally while they’re vans are parked there too

 

[Lamb's Orchard]

Be there when the vans are parking up & have a quiet word witht the drivers, explaining the error of their ways.

Yep, rarely see the other drivers. 🫤

 

[Netherfield]

Get everyone on TFF to sign up to 'text now' send him an anonymous message every day for a week, subject 'Hi Plumber', 'central heating' or 'leaking pipes' message 'don't park too close to the fence'

He'll have to check them all thinking it might be a genuine customer.

 

[CPF]

Leave sleeping dogs alone ,
Get your planning application in before having a word with anyone, try and keep everyone on your side . If you get planning , you don’t have to put it up straightaway .
Then you can go and his kick’s arse.

 

[mobileweld]

Drill 20mm hole through posts. Insert length of M20 threaded bar. Tighten nuts either side. Grind point onto threaded bar.