Recent content by KB6930

Spent a couple of hours giving the best machines we have a bath then I'll put the normal wheels back on the 6930. They all look good for higher hours

Always plough at 90 degrees to the beds for 2 yrs after first year to level the beds second year to scatter the stones this is then sown with a combi drill. Ploughing or cultivating at an angle doesn't do enough to level it up

Tramlines can be paused / switched off from memory as can the bout markers I think but it's been a whisince I has one .

We went from a tx66 to a claas tucano 450 and it had a fair bit more output than the New Holland then onto lexion which was more output again .

If the rod won't push in at all just turn it round it'll only push back in at a certain place .

Which hole ?

They don't work with a gen 5 tractor or so im told so the demand just won't be there for them .

Our dealer was down to about 600 for them now that the next generation is out .

An extended monitor will be the shot . What age is it aa the older ones are now cheap

Yeah start at the top and work inwards . It's a bit of a pain but more to put back together than take apart

In the dashboard somewhere

Can you not get a demo ? If you like your amazone why not go with their double disc option? This is my spring drilling first pic just sand second pic red clay going into black sticky stuff third pic red clay that was so wet when I drilled it I drilled the field 1 way down the hill as I...

No but he said it wouldn't make enough difference. He was blaming the wedge ring packer but the discs just don't cut in the same as 2 straight disc's do

Is the forward speed and width correct?

It'll drill into stuff an amazone wouldn't even look at we had a demo of the amazone with rotec plus and it couldn't bury half of what the kuhn could there was seed everywhere the amazone man was beat with it he said it couldn't be made any better we tried it in one of our snottiest fields.