Ferguson165's latest activity
-
FFerguson165 replied to the thread Mf 6400 linkage switch.Not sure. tractor does not have wheel slip control button in linkage panel but datatronic has the button. buttons in datatronic...
-
FFerguson165 replied to the thread Mf 6400 linkage switch.Yeah, might be. The problem is intermittent with the plough rising.im thinking i need to check load sensing pins and wiring also linkage...
-
FFerguson165 replied to the thread Mf 6400 linkage switch.Thank you, that does help. do you have the diagram page for that bulletin?
-
FFerguson165 replied to the thread Mf 6400 linkage switch.Hi can anyone take a picture from black connector? So that i can put the wires in right order
-
FFerguson165 replied to the thread Mf 6400 linkage switch.I have been studying the workshop manual, for the rocker switch wiring, but it doesnt quite match Number 7 (red) should be 10v supply...
-
-
FFerguson165 replied to the thread Mf 6400 linkage switch.The middle one with the numbers? I had set at highest position. Can the draught pins be resistance tested?
-
FFerguson165 replied to the thread Mf 6400 linkage switch.Not sure, how to set them up?
-
FHaving problems with linkage, when ploughing for example, tractor starts to lift the plough. I tried calibration, but the linkage...
-
FHas anyone removed mf 6400 series cab roof lining? Does it fit from the door or does it require windshield removal? No sunroof.
-
FFerguson165 replied to the thread Massey 6400 cab shocks.That was ebay listing, but pictures did not work, so wasnt sure. I did some cross referencing (MAN part numbers) and found out 384mm...
-
FFerguson165 replied to the thread Massey 6400 cab shocks.I may have found some specs for cb0200 380mm between holes and i guess 329mm fully compressed
-
FFerguson165 replied to the thread Massey 6400 cab shocks.Picture of the current setup, as you can see not much room for travel under the bump stop? Probably 15mm...
-
-
FHi what is the length (eye to eye) of massey 6465 original cab shocks, i have some valtra ones with springs fitted, but i think that...
