Farmerdunk
Member
- Location
- Hertfordshire
Looking for a rear set of rims and tyres to match up with the 600/60-30 front set on our Fendt 720. We have 710’s atm but looking for narrower for spraying. Been told it may be hard to match something up?!
What rear tyre to go with 600/60/30 front
- Thread starter Farmerdunk
- Start date
Speedstar
Member
- Location
- Scottish Borders
I think a 620-70-42 will be the right size for the back what size are you thinking about
Farmerdunk
Member
- Location
- Hertfordshire
Speedstar
Member
- Location
- Scottish Borders
Works fine on my computer
Farmerdunk
Member
- Location
- Hertfordshire
- Location
- south norfolk
Surely you can fit what you want if you alter gear ratios.i know someone who had a Deere on 24 inch rims and he wanted 28 inch rims so altered the ratio to get it correct.
Nick...
Nick...
I would just ring brocks ,and give them the axle and drop box ratios ,and get the correct wheels from them
Speedstar
Member
- Location
- Scottish Borders
Why do you
I do not rate Brocks at all we bought a set of there rims very poor made & no paint on them had to take the Grinder to them to get them to fit & drill out some of the holes there are better company's to get them off like Redpath tyres I would never have any more off Brocks
brentnz
Member
- Location
- New Zealand
18.4r46, 20.8r42(520), 650/65r42, 710/?r38 are all in the same group I think
Farmerdunk
Member
- Location
- Hertfordshire
Our rear tyres are 710/60-42
Farmerdunk
Member
- Location
- Hertfordshire
The above fendt link recommended 650 65-42 or the 710’s we have now. Want something narrower than 650
brentnz
Member
- Location
- New Zealand
Ok so you’re running xeobib or similar vf technology tyres
Farmerdunk
Member
- Location
- Hertfordshire
Yes they are xeobib vf
brentnz
Member
- Location
- New Zealand
As @Speedstar mentioned 620/70r42 should work. Rim width may be your next hurdle
Nearly
Member
- Location
- North of York
Farmerdunk
Member
- Location
- Hertfordshire
Spoke to a dealer today and I think he said 520/70-42? Looking at the chart above would it have been 520/85-42?
Yes
You need a 1,95m diameter wheel. Can be 520/85r42, 580/70r42 or a lot others. Look at the michelin guide posted earlier.
Every tyre in the same line as 20.8r42 (same as 520/85r42) will fit the ratio you need.